HP Cisco MDS 9120 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 259

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message PLATFORM-2-PFM_LC_BOOT_DEV_ABSENT: No bootflash found in Module [dec]. Explanation No bootflash found. Recommended Action Put bootflash in the module and try again. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PLATFORM-2-PFM_LC_BOOT_DEV_FAIL: Bootflash access error in Module [dec]. Explanation Bad bootflash/corrupted file system. Recommended Action Try to put in a known good bootflash in the module and try again. Error Message PLATFORM-2-PFM_LC_BOOT_DEV_FAIL: BAD Bootflash found in Module [dec]. Explanation Bad bootflash found. Recommended Action Put a good bootflash in the module and try again. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message PLATFORM-2-PFM_LC_MOD_POWERED_DOWN: Module [dec] Powered Down. Module is not supported in this chassis. (Chassis Incompatible card). Explanation Module has been powered down because the card is not supported in this chassis. Recommended Action Use the show module CLI command to see the power down reason, or use a similar Fabric Manager procedure.' Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message PLATFORM-2-PFM_NETBOOT_DISABLE: Netboot for supervisor module in slot [dec] is disabled due to incompatible platform. Explanation Standby supervisor failed to power up. Recommended Action Try to replace the standby supervisor. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message PLATFORM-2-PFM_LC_NETBOOT_FAIL: Netboot for Module [dec] failed. Explanation Netboot failed. Recommended Action Replace the BIOS in the module. Introduced Cisco MDS SAN-OS Release 1.2(2a). OL-15956-01 Cisco MDS 9000 Family System Messages Reference 2-223