HP Cisco MDS 9120 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 51

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message BIOS_DAEMON-SLOT#-2-BIOS_DAEMON_LC_ERROR: BIOS Sector ([dec]) is write protected Explanation The BIOS on the module is write protected. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message BIOS_DAEMON-SLOT#-2-BIOS_DAEMON_LC_PRI_BOOT_FAIL: Primary BIOS is corrupted or un-bootable. Explanation The primary BIOS on a module is corrupted. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 3.0(1). BOOTVAR Messages This section contains the boot variable (BOOTVAR) messages. BOOTVAR-2 Error Message BOOTVAR-2-ALLOC_MEMORY: Memory allocation failed. Explanation The service failed to allocate memory. Recommended Action Check to see if the switch is low on memory and reset the switch if it is low. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message BOOTVAR-2-AUTOSYNC_FAILED: Image autosync failed. Reason: [chars] ([hex]). Explanation The image synchronization has failed. Recommended Action Ensure that there is enough space on the flash. Verify the system high availability status. Introduced Cisco MDS SAN-OS Release 1.2(2a). OL-15956-01 Cisco MDS 9000 Family System Messages Reference 2-15