HP Cisco MDS 9120 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 470
VNI Messages, VNI-2
View all HP Cisco MDS 9120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 470 highlights
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] VNI Messages This section contains the virtual network interface (VNI) messages. VNI-2 VNI-3 Error Message VNI-2-ALLOC_MEMORY: Memory allocation failed. Explanation The service failed to allocate a block of dynamic memory. Recommended Action Check the system memory. If system memory is low, reset the switch. Introduced Cisco MDS SAN-OS Release 1.2(2a). VNI-6 Error Message VNI-3-INIT_FAILED: Initialization failed. Component [chars]. Explanation The service failed to start.The failure occurred while initializing the component shown in the error message. Recommended Action Enter the show processes CLI command or use a similar Fabric Manager/Device Manager procedure to check the status of the other processes. Debug the specified component. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message VNI-6-INTERFACE_EVENT: VSAN interface [chars] [chars]. Explanation The specified VSAN Interface had a successful event as shown in the error message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message VNI-6-STARTING: Virtual Network Interface Manager started. Explanation The service has successfully started. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). 2-434 Cisco MDS 9000 Family System Messages Reference OL-15956-01