HP Cisco MDS 9120 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 466

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message VFC-6-STARTING: deamon started. Explanation The virtual Fibre Channel (VFC) daemon successfully started. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.0(1b). VHBAD Messages This section contains the virtual host bus adapter daemon (VHBAD) messages. VHBAD-2 Error Message VHBAD-2-PROC_ADD_NPORT_FAIL: Failed to set local nport with SCSI target driver error: [hex]. Explanation SCSI target process tried to add N port with its peer kernel driver. No SCSI discovery can be performed. Recommended Action Enter the show SCSI target internal driver CLI command or use a similar Fabric Manager/Device Manager procedure to collect more information. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message VHBAD-2-PROC_OPEN_VHBA_DEVICE_FAIL: Failed to communicate with SCSI target driver error: [hex]. Explanation SCSI target process failed to communicate with its peer kernel driver. No SCSI discovery can be performed. Recommended Action Enter the show SCSI target internal driver CLI command or use a similar Fabric Manager/Device Manager procedure to collect more information. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message VHBAD-2-PROC_SET_SCSI_INDEX_FAIL: Failed to set SCSI index SCSI target driver error: [hex]. Explanation SCSI target process failed to set SCSI index with its peer kernel driver. No SCSI discovery can be performed. Recommended Action Enter the show SCSI target internal driver CLI command or use a similar Fabric Manager/Device Manager procedure to collect more information. Introduced Cisco MDS SAN-OS Release 1.2(2a). 2-430 Cisco MDS 9000 Family System Messages Reference OL-15956-01