HP Cisco MDS 9120 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 194
IPsec-3, show ipsec internal crypto-acc interface gigabit <
View all HP Cisco MDS 9120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] IPsec-3 Error Message IPSEC-3-14_2_MODULE_PACKETS_DROPPED: [chars]: packets were dropped in the module. Explanation The 14/2-port Multiprotocol Services (14/2-MPS) module dropped packets. Recommended Action Enter the show ipsec internal crypto-acc interface gigabit CLI command or use a similar Fabric Manager/Device Manager procedure to collect drop statistics. If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 2.0(2b). IPsec-5 Error Message IPSEC-3-IPSEC_FIPS_TEST_FAILED: IPSEC FIPS compliance test failed. Explanation IPsec FIPS compliance test failed. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.1(1). Error Message IPSEC-3-IPSEC_MSG_SEND_FAILURE: failed to send [chars] to sap [dec]: [chars]. Explanation Failed to send a message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message IPSEC-5-IPSEC_CMS_IF_ACL_UPDATED: IP ACL [chars] updated while Crypto map [chars] [dec] bound to interface(s). Explanation IP-ACL was updated while it is mapped to a crypto map that is bound to an interface(s). Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message IPSEC-5-IPSEC_DISABLED: IPSec Disabled. Explanation IPsec is disabled. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.0(1b). 2-158 Cisco MDS 9000 Family System Messages Reference OL-15956-01