HP Cisco MDS 9120 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 61

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message CERT_ENROLL-3-CERT_EN_FIPS_MODE_INIT_ERROR: Could not initialize FIPS mode : [chars]. Explanation FIPS mode initialization error. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.1(1). Error Message CERT_ENROLL-6-CERT_EN_MESSAGE: [chars]. Explanation The digital certificate enrollment process generated an informational message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.0(1). CFS Messages This section contains the Cisco Fabric Services (CFS) messages. CFS-2 Error Message CFS-2-MTS_REJECT: Verification failed reject MTS message SAP [dec]:RR-token [hex]. Explanation This MTS message could have been posted by the previous active running pre 3.x; MTS structure has changed since then hence ignore the MTS message, Source SAP [dec]; RR-token [hex]. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.2(1). Error Message CFS-2-CFS_REJECT: CFS reject: [chars]: Switch WWN [chars], reason [chars]. Explanation When Cisco Fabric Service (CFS) receives a malformed CFS packet from a switch with WWN and IP address shown in the error message, then CFS rejects the packet. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message CFS-2-EXITING: Exit reason: [chars]. Explanation The Cisco Fabric Services process has exited because of the error shown in the error message. The process will be restarted automatically. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.0(1b). OL-15956-01 Cisco MDS 9000 Family System Messages Reference 2-25