HP Cisco MDS 9120 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 95

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message ETHPORT-5-IF_DOWN_SOFTWARE_FAILURE: Interface [chars] is down (Port software failure). Explanation The software servicing the data path on the port has failed. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ETHPORT-5-IF_DOWN_SRC_MOD_NOT_ONLINE: Interface [chars] is down(Tunnel source module not online). Explanation The module that has the tunnel source port of this FCIP interface is not fully online. Recommended Action The module that has the tunnel source port is coming online. Enter show module to find the module status. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ETHPORT-5-IF_DOWN_SRC_PORT_NOT_BOUND: Interface [chars] is down (Tunnel port src interface unbound). Explanation The tunnel port source interface is unbound. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ETHPORT-5-IF_DOWN_SRC_PORT_REMOVED: Interface [chars] is down(Tunnel src port removed). Explanation The tunnel source port of this FCIP interface has been removed. Recommended Action The source interface with an IP address that matches the IP address of the bound entity is removed. This happens normally when the module on which the source interface exists is removed. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message ETHPORT-5-IF_DOWN_SUSPENDED: Interface [chars] is down (Suspended). Explanation This interface belongs to a PortChannel and has been suspended because of an error during port bringup. Recommended Action Enter the shutdown CLI command then no shutdown. If this happens again, enter the show port internal info and show port internal event-history CLI commands on the interface to collect more information. You can alternatively use Fabric Manager and/or Device Manager instead of the command line method. Introduced Cisco MDS SAN-OS Release 1.2(2a). OL-15956-01 Cisco MDS 9000 Family System Messages Reference 2-59