HP Cisco MDS 9120 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 335

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SCSI target-3-PSS_SNAPSHOT_FAIL: pss snapshot runtime to uri:[chars] failed due to error: [hex]. Explanation SCSI target process persistent storage service (PSS) snapshot of runtime to uri failed because of the error shown in the error message. Recommended Action Enter the show flash command or use a similar Fabric Manager/Device Manager procedure to collect more information. See PSS system error codes for the reason. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message SCSI target-3-PSS_STORE_FAIL: pss store runtime entry key:[hex] val:[hex] failed due to error: [hex]. Explanation SCSI target process persistent storage service (PSS) store runtime entry key failed because of the error shown in the error message. Recommended Action Enter the show flash command or use a similar Fabric Manager/Device Manager procedure to collect more information. See PSS system error codes for the reason. Introduced Cisco MDS SAN-OS Release 2.0(1b). SCSI target-7 Error Message SCSI target-7-SCSI_TARGET_DISCOVERED: SCSI target discovered VSAN:[dec] FCID:[hex] prlisparm:[hex]. Explanation SCSI target process discovered a VSAN with the FC ID and PRLI service parameter shown in the error message Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 2.0(1b). SAN Device Virtualization Messages This section contains SAN Device Virtualization (SDV) messages. SDV-6 Error Message SDV-6-BCAST_NOT_SUPPORTED: Broadcast attribute will be ignored for SDV devices. Explanation A broadcast attribute will be ignored for SAN Device Virtualization (SDV) devices. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 3.1(2). OL-15956-01 Cisco MDS 9000 Family System Messages Reference 2-299