HP Cisco MDS 9120 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 289

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] PORT-SECURITY Messages (Deprecated) This section contains the port security (PORT-SECURITY) messages. These messages were deprecated in Cisco MDS SAN-OS Release 1.3(4a). They were replaced by the "PORT_SECURITY Messages" section on page 2-263. PORT-SECURITY-2 Error Message PORT-SECURITY-2-ALLOC_FAILED: Memory allocation failed for size:[dec] for [chars]. Explanation Memory allocation failed for the entity and size shown in the error message. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.3(1). Deprecated Cisco MDS SAN-OS Release 1.3(4a). Error Message PORT-SECURITY-2-FEATURE_DISABLED: Feature [chars] disabled due to [chars]. Explanation The feature is unavailable and will be disabled. Recommended Action Install the correct license and reenable. Introduced Cisco MDS SAN-OS Release 1.3(1). Deprecated Cisco MDS SAN-OS Release 1.3(4a). PORT-SECURITY-3 Error Message PORT-SECURITY-3-BINDING_CONFLICT: [chars] in VSAN [dec]. Explanation An already logged in device is in conflict with the port security manager (PSM) active binding configurations. The error message indicates the WWN of the login entity, interface and VSAN. Recommended Action Use the autolearn feature with activation. This message is informational in nature, and the device will not be logged out. However, it will be denied login when it attempts to log in the next time. Introduced Cisco MDS SAN-OS Release 1.3(1). Deprecated Cisco MDS SAN-OS Release 1.3(4a). OL-15956-01 Cisco MDS 9000 Family System Messages Reference 2-253