HP Designjet 350c HP Designjet 330 and 350C Plotters - Users Guide - Page 120
the boxes - see
View all HP Designjet 350c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Maintaining your plotter Replacing cartridges 3 350C Match the color of the cartridge's label with the color of the dot above the empty stall. For users with color-vision deficiencies: you can identify the colors of the cartridges by the part numbers on the boxes - see page 10-17. 1 Take the new cartridge out of its box. 2 Remove the colored protective tape and tab from the cartridge's nozzles. 3 Make sure that the plotter is still switched ON. (Never install cartridges with the plotter switched off.) 1754 4 Insert the new cartridge in the stall. Press down lightly and push the cartridge away from you until it snaps into place. If it is installed correctly, the Ready light flashes for a second or two. 2 1 r0004 330 2 1 Yellow Cyan Magenta Black 0004 350C 4 When you have finished replacing cartridges, lower the cover. If you wish, you can now check your cartridge alignment by running the Black Cartridge Alignment Routine (See page 5-3). However, this is normally only required for troubleshooting. 7-6