HP Designjet 350c HP Designjet 330 and 350C Plotters - Users Guide - Page 137
to eject any pieces of media that are still
View all HP Designjet 350c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Troubleshooting Clearing a media jam 4 Carefully remove any torn pieces from inside the plotter. Be careful not to touch the stainless steel strip that runs the length of the plotter behind the cartridge carriage; its edge is very sharp. Media torn TROUBLE- 9 SHOOTING 1748 5 Lower the bail, raise the media-jam lever and lower the cover. 3 Bar lowered. Media-jam lever raised. 1 2 1802 6 On the front panel, press Form Feed to eject any pieces of media that are still in the media path. 9-7
9–7
4
Carefully remove any torn pieces from inside the plotter. Be careful not to
touch the stainless steel strip that runs the length of the plotter behind the
cartridge carriage; its edge is very sharp.
Media torn
1748
5
Lower the bail, raise the media-jam lever and lower the cover.
Bar lowered.
Media-jam lever
raised.
1
2
3
1802
6
On the front panel, press
Form Feed
to eject any pieces of media that are still in
the media path.
TROUBLE–
9
SHOOTING
Troubleshooting
Clearing a media jam