HP Designjet 350c HP Designjet 330 and 350C Plotters - Users Guide - Page 58
The bail the black metal bar should automatically rise when you raise
View all HP Designjet 350c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Working with media Loading roll media 2 If the old roll is not used up, then remove the media from the media path, as explained here. 1 Raise the cover. 2 Lower the green media lever to release the media. 3 The bail (the black metal bar) should automatically rise when you raise the cover. 4 Turn the roll on the spindle to wind the media out of the plotter and onto the roll. 1 3 2 4 1920 5 Raise the green media lever and then lower the cover. 2-18
2–18
2
If the old roll is not used up
, then remove the media from the media path, as
explained here.
1
Raise the cover.
2
Lower the green media lever to release the media.
3
The bail (the black metal bar) should automatically rise when you raise the
cover.
4
Turn the roll on the spindle to wind the media out of the plotter and onto the
roll.
5
Raise the green media lever and then lower the cover.
1
2
3
4
1920
Working with media
Loading roll media