HP Designjet 350c HP Designjet 330 and 350C Plotters - Users Guide - Page 153
HP-GL 7586B, HP-GL/2, HP RTL, PJL - carriage axis error
View all HP Designjet 350c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
Reference Plotter specifications Functional specifications (continued) Supported media sizes Width (carriage axis) Minimum Maximum Length (paper axis) Minimum Maximum 210 mm (8.3 in) E/A0-size plotter: 210 mm (8.3 in) 917 mm (36.1 in) Sheet: 1.32 m (52 in) D/A1-size plotter: 625 mm (24.6 in) Maximum length of long-axis plot on roll media: 15.2 m (50 ft) Margins For plotting area (media size minus margins), see page 10-7 Leading edge: Trailing edge: Sides: 17 mm (0.67 in) 17 mm (0.67 in) 5 mm (0.2 in) All measurements 2 mm (0.08 in). Resolution 1 On Setup Sheet, if Color/Mono is set to: Print color as grayscale Fast print quality: 300 x 300 dpi. Other print qualities: 600 x 600 dpi.2 Print color as color 350C All print qualities: 300 x 300 dpi.3 Accuracy 0.38 mm (0.015 in) or 0.2% of the specified vector length, whichever is greater, (Maximum at 23_C (73_F), 50-60% relative humidity, on HP Matte Film. accumulated error) Programming languages supported HP-GL (7586B), HP-GL/2, HP RTL, PJL 1 The 600 dpi resolution specified is addressable resolution, that is, it refers to the smallest movement the print head can make between dots rather than to the size of the dot. 2 Except for glossy media types, on which the resolution is always 300 dpi. 3 Except for black with HP RTL, where the resolution is 600 x 600 dpi. REFERENCE 10 10-3