HP Designjet 350c HP Designjet 330 and 350C Plotters - Users Guide - Page 25
put the correct cartridge in the correct
View all HP Designjet 350c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
SETUP 1 Setting up your plotter Task 5: Load the print cartridge(s) WARNING 330 350C Don't touch the stainless steel strip that runs the length of the plotter behind the cartridge carriage; its edge is very sharp. Keep hair, jewelry, clothing, and foreign objects away from the plotter mechanisms. A set of cartridges was supplied with the plotter: The HP DesignJet 330 is supplied with one black cartridge. The HP DesignJet 350C is supplied with four cartridges: - yellow - cyan - magenta - black For the 350C, each stall in the carriage has a dot indicating the color of the cartridge that should be installed: you must put the correct cartridge in the correct stall. The sequence of the stall colors is, from left to right, yellow, cyan, magenta and black. Yellow Cyan Magenta Black 00019 For users with color-vision deficiencies. You can identify the colors of the cartridges by the part numbers on the boxes - see page 10-17. Note. It is not recommended to operate the 350C with only the black cartridge loaded. 1-11