HP LaserJet P4014 HP LaserJet P4010 and P4510 Series - User Guide - Page 40

Item Values ORDER AT JAM RECOVERY 1 TO 100 AUTO OFF ON RAM DISK AUTO OFF LANGUAGE (DEFAULT) Several Explanation STOP AT OUT: The product stops printing when the print cartridge is depleted. You must replace the print cartridge before printing can continue. OVERRIDE AT OUT: Select this option to override the message and continue printing after the print cartridge is depleted. HP does not guarantee print quality after you select this option. The default value is OVERRIDE AT OUT. Set the threshold at which the ORDER BLACK CARTRIDGE message appears. The value is the percent of overall cartridge life that remains. The default is 23%. Determines how the product behaves if a jam occurs. AUTO: The product automatically selects the best mode for jam recovery. This is the default setting. OFF: The product does not reprint pages following a jam. Printing performance might be increased with this setting. ON: The product automatically reprints pages after a jam is cleared. Determines how the RAM disk is configured. AUTO: Allows the product to determine the optimal RAM-disk size based on the amount of available memory. OFF: The RAM is disabled. NOTE: If you change the setting from OFF to AUTO, the product automatically reinitializes when it becomes idle. The default setting is AUTO. Selects the language for the messages that appear on the control-panel display. The default setting is determined by the country/region in which the product is purchased. 28 Chapter 2 Control panel ENWW