HP LaserJet P4014 HP LaserJet P4010 and P4510 Series - User Guide - Page 45
Security, Print Sec Secure Web, Ipsec, Disable, Reset Security, Diagnostics, Embedded Tests,
View all HP LaserJet P4014 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Table 2-1 Embedded Jetdirect and EIO Jetdirect menus (continued) Menu item Sub-menu item Sub-menu item Values and Description SECURITY PRINT SEC PAGE YES: Prints a page that contains the current security settings on the HP Jetdirect print server. NO*: A security settings page is not printed. SECURE WEB For configuration management, specify whether the embedded Web server will accept communications using HTTPS (Secure HTTP) only, or both HTTP and HTTPS. HTTPS Required: For secure, encrypted communications, only HTTPS access is accepted. The print server will appear as a secure site. HTTP/HTTPS optional: Access using either HTTP or HTTPS is permitted. IPSEC Specify the IPsec or Firewall status on the print server. KEEP: IPsec/Firewall status remains the same as currently configured. DISABLE: IPsec/Firewall operation on the print server is disabled. RESET SECURITY Specify whether the current security settings on the print server will be saved or reset to factory defaults. NO*: The current security settings are maintained. YES: Security settings are reset to factory defaults. DIAGNOSTICS EMBEDDED TESTS This menu provides tests to help diagnose network hardware or TCP/IP network connection problems. Embedded tests help to identify whether a network fault is internal or external to the product. Use an embedded test to check hardware and communication paths on the print server. After you select and enable a test and set the execution time, you must select EXECUTE to initiate the test. Depending on the execution time, a selected test runs continuously until either the product is turned off, or an error occurs and a diagnostic page is printed. LAN HW TEST CAUTION: Running this embedded test will erase your TCP/IP configuration. This test performs an internal loopback test. An internal loopback test will send and receive packets only on the internal network hardware. There are no external transmissions on your network. Select YES to choose this test, or NO to not choose it. HTTP TEST This test checks operation of HTTP by retrieving predefined pages from the product, and tests the embedded Web server. Select YES to choose this test, or NO to not choose it. SNMP TEST This test checks operation of SNMP communications by accessing predefined SNMP objects on the product. ENWW Configure Device menu 33