HP LaserJet P4014 HP LaserJet P4010 and P4510 Series - User Guide - Page 42

I/O submenu, Embedded Jetdirect and EIO <X> Jetdirect menus

Page 42 highlights

I/O submenu Items on the I/O (input/output) menu affect the communication between the product and the computer. If the product contains an HP Jetdirect print server, you can configure basic networking parameters by using this submenu. You can also configure these and other parameters through HP Web Jetadmin or the embedded Web server. Item Values Explanation I/O TIMEOUT 5 to 300 Select the I/O timeout period in seconds. Use this setting to adjust timeout for the best performance. If data from other ports appears in the middle of your print job, increase the timeout value. EMBEDDED JETDIRECT MENU The default setting is 15. See the next table for a list of options. EIO JETDIRECT MENU NOTE: In the following table, items that are marked with an asterisk (*) are the default setting. Table 2-1 Embedded Jetdirect and EIO Jetdirect menus Menu item Sub-menu item Sub-menu item Values and Description TCP/IP ENABLE OFF: Disable the TCP/IP protocol. HOST NAME IPV4 SETTINGS CONFIG METHOD ON*: Enable the TCP/IP protocol. An alphanumeric string, up to 32 characters, used to identify the product. This name is listed on the HP Jetdirect configuration page. The default host name is NPIxxxxxx, where xxxxxx is the last six digits of the LAN hardware (MAC) address. Specifies the method that TCP/IPv4 parameters will be configured on the HP Jetdirect print server. BOOTP: Use BootP (Bootstrap Protocol) for automatic configuration from a BootP server. DHCP*: Use DHCP (Dynamic Host Configuration Protocol) for automatic configuration from a DHCPv4 server. AUTO IP: Use automatic link-local IPv4 addressing. An address in the form 169.254.x.x is assigned automatically. MANUAL SETTINGS MANUAL: Use the MANUAL SETTINGS menu to configure TCP/IPv4 parameters. (Available only if CONFIG METHOD is set to MANUAL) Configure parameters directly from the printer control panel: IP ADDRESS: The unique IP address of the printer, where n is a value from 0 to 255. 30 Chapter 2 Control panel ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246

I/O submenu
Items on the I/O (input/output) menu affect the communication between the product and the computer.
If the product contains an HP Jetdirect print server, you can configure basic networking parameters by
using this submenu. You can also configure these and other parameters through HP Web Jetadmin or
the embedded Web server.
Item
Values
Explanation
I/O TIMEOUT
5 to 300
Select the I/O timeout period in seconds.
Use this setting to adjust timeout for the best performance. If
data from other ports appears in the middle of your print job,
increase the timeout value.
The default setting is
15
.
EMBEDDED JETDIRECT
MENU
EIO <X> JETDIRECT MENU
See the next table for a list of options.
NOTE:
In the following table, items that are marked with an asterisk (*) are the default setting.
Table 2-1
Embedded Jetdirect and EIO <X> Jetdirect menus
Menu item
Sub-menu item
Sub-menu item
Values and Description
TCP/IP
ENABLE
OFF
: Disable the TCP/IP protocol.
ON
*: Enable the TCP/IP protocol.
HOST NAME
An alphanumeric string, up to 32 characters, used to
identify the product. This name is listed on the
HP Jetdirect configuration page. The default host name
is NPIxxxxxx, where xxxxxx is the last six digits of the
LAN hardware (MAC) address.
IPV4 SETTINGS
CONFIG METHOD
Specifies the method that TCP/IPv4 parameters will be
configured on the HP Jetdirect print server.
BOOTP
: Use BootP (Bootstrap Protocol) for automatic
configuration from a BootP server.
DHCP
*: Use DHCP (Dynamic Host Configuration
Protocol) for automatic configuration from a DHCPv4
server.
AUTO IP
: Use automatic link-local IPv4 addressing. An
address in the form 169.254.x.x is assigned
automatically.
MANUAL
: Use the
MANUAL SETTINGS
menu to
configure TCP/IPv4 parameters.
MANUAL SETTINGS
(Available only if
CONFIG METHOD
is set to
MANUAL
) Configure parameters directly from the
printer control panel:
IP ADDRESS
: The unique IP address of the printer,
where n is a value from 0 to 255.
30
Chapter 2
Control panel
ENWW