HP LaserJet P4014 HP LaserJet P4010 and P4510 Series - User Guide - Page 79

Disable network protocols (optional), Disable IPX/SPX, AppleTalk, or DLC/LLC, CON DEVICE

Page 79 highlights

Disable network protocols (optional) By factory default, all supported network protocols are enabled. Disabling unused protocols has the following benefits: ● Decreases product-generated network traffic ● Prevents unauthorized users from printing to the product ● Provides only pertinent information on the configuration page ● Allows the product control panel to display protocol-specific error and warning messages Disable IPX/SPX, AppleTalk, or DLC/LLC NOTE: Do not disable IPX/SPX in Windows-based systems that print through IPX/SPX. 1. Press Menu . 2. Press the down arrow to highlight CONFIGURE DEVICE, and then press OK. 3. Press the down arrow to highlight I/O, and then press OK. 4. Press the down arrow to highlight EMBEDDED JETDIRECT, and then press OK. 5. Press the down arrow to highlight IPX/SPX, and then press OK. -orPress the down arrow to highlight APPLETALK, and then press OK. -orPress the down arrow to highlight DLC/LLC, and then press OK. 6. Press OK to select ENABLE. 7. Press the down arrow to highlight OFF, and then press OK. 8. Press Menu to return to the Ready state. ENWW Network configuration 67

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246

Disable network protocols (optional)
By factory default, all supported network protocols are enabled. Disabling unused protocols has the
following benefits:
Decreases product-generated network traffic
Prevents unauthorized users from printing to the product
Provides only pertinent information on the configuration page
Allows the product control panel to display protocol-specific error and warning messages
Disable IPX/SPX, AppleTalk, or DLC/LLC
NOTE:
Do not disable IPX/SPX in Windows-based systems that print through IPX/SPX.
1.
Press
Menu
.
2.
Press the down arrow
to highlight
CONFIGURE DEVICE
, and then press
OK
.
3.
Press the down arrow
to highlight
I/O
, and then press
OK
.
4.
Press the down arrow
to highlight
EMBEDDED JETDIRECT
, and then press
OK
.
5.
Press the down arrow
to highlight
IPX/SPX
, and then press
OK
.
-or-
Press the down arrow
to highlight
APPLETALK
, and then press
OK
.
-or-
Press the down arrow
to highlight
DLC/LLC
, and then press
OK
.
6.
Press
OK
to select
ENABLE
.
7.
Press the down arrow
to highlight
OFF
, and then press
OK
.
8.
Press
Menu
to return to the
Ready
state.
ENWW
Network configuration
67