HP Nc6220 Hardware-Software Guide - Page 176

Security 5. Use the arrow keys to select the location of the hard drive, and then press f10. 6. Use the arrow keys to select the field for the password you want to change. Type your current password in the Old password field, and then type the new password in the New password field and in the Verify new password field. Then press f10. 7. To save your preferences, use arrow keys to select File > Save Changes and Exit, and then follow the instructions on the screen. Your preferences are set when you exit Computer Setup and take effect when the notebook restarts. Removing DriveLock Protection To access the DriveLock settings in Computer Setup: 1. Shut down the notebook. If you are not sure whether the notebook is off or in hibernation, turn the notebook on by pressing the power button, and then shut down the notebook through the operating system. 2. Be sure that the hard drive is inserted into the notebook (not into an optional docking device or external MultiBay). 3. Open Computer Setup by turning on the notebook. Press f10 while the F10 = ROM Based Setup message is displayed in the lower-left corner of the screen. ❏ To change the language, press f2. ❏ For navigation instructions, press f1. 4. Use the arrow keys to select Security > DriveLock passwords, and then press enter. 5. Use the arrow keys to select the location of the hard drive, and then press f10. 6. Toggle the Protection field to Disable, and then press f10. Hardware and Software Guide 12-17