HP Nc6220 Hardware-Software Guide - Page 227
Bootable Devices in Computer Setup, Advanced, Device Options., Enable, USB legacy support., Security
View all HP Nc6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 227 highlights
MultiBoot Bootable Devices in Computer Setup The notebook can start up from a USB device or the NIC only if that device has been enabled for inclusion in MultiBoot. To enable a device or location for inclusion in MultiBoot: 1. Open Computer Setup by turning on or restarting the notebook. Press f10 while the F10 = ROM Based Setup message is displayed in the lower-left corner of the screen. ❏ To change the language, press f2. ❏ For navigation instructions, press f1. 2. To enable bootable media in USB drives or in drives inserted into an optional docking device, use the arrow keys to select the Advanced menu > Device Options. Then select Enable USB legacy support. - or - To enable a NIC, select Security menu > Device security, and then select Internal network adapter boot. 3. Save your preferences and exit Computer Setup by using the arrow keys to select File > Save Changes and Exit. Then follow the instructions on the screen. Your preferences are set when you exit Computer Setup and take effect when the notebook restarts. ✎ To connect a NIC to a Preboot eXecution Environment (PXE) or Remote Program Load (RPL) server during startup without using MultiBoot, quickly press f12 when the Network Service Boot message is displayed in the lower-left corner of the screen. Hardware and Software Guide B-4