HP Nc6220 Hardware-Software Guide - Page 85
Using the Audio-In (Microphone) Jack, When you connect a device to the headphone jack
View all HP Nc6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Multimedia Using the Audio-In (Microphone) Jack The notebook is equipped with a stereo microphone jack. When connecting a microphone to the microphone jack, use a microphone with a 3.5-mm plug. ■ If you connect a stereo (dual-channel) microphone, stereo sound will be recorded. ■ If you connect a monaural (single-channel) microphone, left-channel sound will record on both channels. ■ If you connect a dynamic microphone, the recommended sensitivity may not be achieved. ■ When an external microphone is connected to the notebook, the notebook internal microphone is disabled. Using the Audio-Out (Headphone) Jack Å WARNING: To reduce the risk of personal injury, adjust the volume before putting on headphones or a headset. Ä CAUTION: To prevent possible damage to an external device, do not plug a single sound channel (monaural) connector into the headphone jack. The headphone jack is also used to connect the audio function of an audio/video device such as a television or VCR. When you connect a device to the headphone jack: ■ Use only a 3.5-mm stereo plug. ■ For best sound quality, use 24-ohm to 32-ohm headphones. ✎ When you connect a device to the headphone jack, the internal speakers are disabled. Hardware and Software Guide 4-3