HP Nc6220 Hardware-Software Guide - Page 225
Default Boot Sequence
View all HP Nc6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 225 highlights
MultiBoot Default Boot Sequence By default, when more than one bootable device is in the system, the notebook chooses the startup device by searching enabled devices and locations in a predetermined sequence. On every boot, the system looks for bootable drive A devices first. If it fails to find a bootable drive A device, it searches for bootable drive C devices. Drive A devices include optical drive and diskette drives. Drive C devices include optical drives and primary hard drives. The primary hard drive can only boot as drive C. The NIC does not have a drive letter assigned to it. ✎ An optical drive device (such as a CD-ROM drive) can boot either as drive A or drive C, depending on the format of the CD. Most bootable CDs boot as drive A. If you have a CD that boots as the C drive, the system will boot the diskette drive before it boots the CD. By default, the notebook selects the startup device by searching enabled devices and locations in a predetermined sequence. You can change the sequence in which the notebook searches for a startup device by enabling MultiBoot and entering a new startup sequence, also called a boot order. Or, you can use MultiBoot Express to set the notebook to prompt you for a startup location each time the notebook is started or restarted. Hardware and Software Guide B-2