HP Photosmart 618 HP Photosmart 618 digital camera - (English) User Guide - Page 89
Problem, Solution, Troubleshooting, Troubleshooting Common Problems
View all HP Photosmart 618 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Chapter 7: Troubleshooting Problem Solution The camera is powered on, but when I press a button, the camera does not respond Try powering the camera off and then on again. Remove the batteries or unplug the HP AC power adapter. Then reinstall the batteries or plug in the AC power adapter, and power on the camera again. I always have to re-set the date and time after I change the batteries in the camera or unplug the HP AC power adapter from the camera This will happen if either you remove the batteries from the camera, or you remove the batteries and unplug the HP AC power adapter, for more than 5 minutes. (Note that even if the batteries are drained, the date and time will remain set as long as you leave the drained batteries in the camera.) When changing batteries, try to put the new batteries in within 5 minutes of when you remove the old batteries. Similarly, if you are using the HP AC power adapter, either leave batteries in the camera (even if the batteries are drained) when you unplug the adapter, or unplug the adapter for less than 5 minutes at a time. The rechargeable HP NiMH batteries I'm using don't seem to power the camera for very long You must recharge all 4 HP NiMH batteries after fully draining them four times for the batteries to reach their optimum capacity and performance. For more information, see "Using the HP NiMH Batteries and Recharger" on page 108. The incorrect language is set on the camera 1. Set the camera mode dial to Capture mode . 2. Power on the camera if you haven't already. 3. Press the MENU button to display the Capture mode menus on the image LCD. 4. Press the right arrow on the 4-way controller three times to move to the Preferences menu. 5. Press the down arrow on the 4-way controller seven times to move to the Language menu option. 6. Press the left (Edit) soft key. The Language submenu is displayed. 7. Press the down or up arrow on the 4-way controller to highlight the language you want. 8. Press the left (Select) soft key to select the highlighted language and to exit this screen. You return to the Preferences menu of Capture mode, and the camera is now using the language you set. 9. Press the right (Exit) soft key to exit the menu. 89 Troubleshooting Common Problems