HP Photosmart 618 HP Photosmart 618 digital camera - (English) User Guide - Page 9
Using the Status LCD,
View all HP Photosmart 618 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Figure 2: Status LCD Indicators Battery status Flash Timer mode mode Auto focus range Pictures remaining Figure 3: Status LCD Buttons Using the Status LCD The status LCD conveys important information about the camera's status. The status LCD shows you the status of the camera's batteries, the settings for the flash mode, timer mode, and auto focus range, as well as the number of pictures remaining on the memory card (see Figure 2). The status LCD turns on every time you power on the camera. You can use the status LCD to assess the current status of the camera, and to change the flash mode, timer mode, and auto focus range settings when preparing to take pictures. The buttons beneath the status LCD − the flash mode button , the timer mode button , and the auto focus range button − toggle the associated camera settings on and off within the status LCD (see Figure 3). To change one of these settings, press the associated button until you see the desired icon or set of icons displayed in the status LCD for the setting you want. The next three subsections explain the possible settings for the flash mode, timer mode, and auto focus range on the camera. Flash mode Timer mode Auto focus range Note: If you see 000 flashing in the status LCD, this means that either there is no memory card in the camera, or the memory card is full. Chapter 2: Preparing to Take Pictures 9 Using the Status LCD