HP Photosmart Premium TouchSmart Web All-in-One Printer - C309 User Guide - Page 137
The Fax Line Condition test failed, Solution
View all HP Photosmart Premium TouchSmart Web All-in-One Printer - C309 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Solve a problem connected to the port labeled 1-LINE on the back of the product and the other end to your telephone wall jack, as shown below. 1 Telephone wall jack 2 Phone cord supplied in the box with the product • Check the connection between the telephone wall jack and the product to make sure the phone cord is secure. The "Fax Line Condition" test failed Solution: • Make sure you connect the product to an analog phone line or you will not be able to send or receive faxes. To check if your phone line is digital, connect a regular analog phone to the line and listen for a dial tone. If you do not hear a normal sounding dial tone, it might be a phone line set up for digital phones. Connect the product to an analog phone line and try sending or receiving a fax. • Check the connection between the telephone wall jack and the product to make sure the phone cord is secure. • Make sure you have correctly connected the product to the telephone wall jack. Using the phone cord supplied in the box with the product, connect one end to your telephone wall jack, then connect the other end to the port labeled 1-LINE on the back of the product. For more information on setting up the product for faxing, see Set up the HP Photosmart for faxing. • Other equipment, which uses the same phone line as the product, might be causing the test to fail. To find out if other equipment is causing a problem, Fax troubleshooting 135