HP StorageWorks 1606 Brocade Fabric OS Administrator's Guide v6.3.0 (53-100133 - Page 535

Proxy PID configuration 21 FCR:Admin> fcrlsanmatrix --add -lsan 10 19 FCR:Admin> fcrlsanmatrix --apply -all Viewing the LSAN zone binding matrixes 1. Log on to the FC router as admin. 2. Enter the following command to view the FC router matrix: fcrlsanmatrix --fabricview -fcr 3. Enter the following command to view the LSAN fabric matrix: fcrlsanmatrix --fabricview -lsan Example FCR:Admin> fcrlsanmatrix --fabricview -fcr SAVED FCR PAIRS FCR FCR 10:00:00:60:69:c3:12:b2 (2) 10:00:00:60:69:c3:12:b3 (unknown) FCR:Admin> fcrlsanmatrix --fabricview -lsan LSAN MATRIX is activated Fabric ID Fabric ID 4 5 4 7 10 19 Proxy PID configuration When an FC router is first configured, the PIDs for the proxy devices are automatically assigned. Proxy PIDs (as well as phantom domain IDs) persist across reboots. The most common situation in which you would set a proxy PID is when you replace a switch. If you replace the switch and want to continue using the old PID assignments, you can configure it to do so; this value remains in the system even if the blade is replaced. To minimize disruption to the edge fabrics, set the proxy PIDs to the same values used with the old hardware. The fcrProxyConfig command displays or sets the persistent configuration of proxy devices. Used with the -s slot option, it can also influence the assignment of the xlate domain port number (which is used to determine the Area_ID field of the PID) and the Port_ID field. Like the PIDs in a fabric, a proxy PID must be unique. If the slot argument results in a duplicate PID, it will be ignored. Proxy PIDs are automatically assigned to devices imported into a fabric, starting at f001. For Proxy IDs projected to an M-EOS edge fabric in McDATA fabric mode, use valid ALPAs (lower 8 bits). Use the fcrXlateConfig command to display or assign a preferred domain ID to a translate domain. Fabric OS Administrator's Guide 493 53-1001336-01