HP StorageWorks 1606 Brocade Fabric OS Administrator's Guide v6.3.0 (53-100133 - Page 558

B Examples of supported configurations 3. Configure the routes on the Management Station. a. Add the route on the Management Station that is going to the 7500 L1. linux> route add -host 10.1.1.10 gw 192.168.3.10 b. Add the route on the Management Station that is going to the 7500 R1. linux> route ge0 -host 10.1.2.20 gw 192.186.3.20 Configuring a Management Station on different subnets For a configuration with multiple subnets, the routes must be added to all intermediate hops in the network. To minimize the effect on IP traffic and limit the possibility that unnecessary access will be given, a host-specific route can be used on all routes specified for the Brocade 7500 Extension Switches. This will ensure that only IP traffic destined for the switches management addresses is routed to the 7500s and all other IP traffic that may be destined for that subnet will use a different path or get dropped if no other path is available. When adding routes to the management station, a host-specific route can be used, but is not necessary. FIGURE 83 Management station on a different subnet 1. Configure the management addresses for the 7500 L1. a. Configure the internal addresses for the inbd devices for CP and GE port (GE port 0 for this example): switch:admin> portcfg inbandmgmt ge0 ipaddrset cp 192.168.255.1 255.255.255.0 switch:admin> portcfg inbandmgmt ge0 ipaddrset ge 192.168.255.2 255.255.255.0 b. Add the route on the switch going to the Management Station. switch:admin> portcfg inbandmgmt ge0 routeadd 192.168.3.0 255.255.255.0 192.168.1.250 2. Configure the management addresses for the 7500 R1. 516 Fabric OS Administrator's Guide 53-1001336-01