HP StorageWorks 1606 Brocade Fabric OS Administrator's Guide v6.3.0 (53-100133 - Page 97

Management server database 3 select : (0..3) [2] 1 MS Access List consists of (14): { 20:00:00:20:37:65:ce:aa 20:00:00:20:37:65:ce:bb 20:00:00:20:37:65:ce:ff 20:00:00:20:37:65:ce:11 20:00:00:20:37:65:ce:22 20:00:00:20:37:65:ce:33 20:00:00:20:37:65:ce:44 10:00:00:60:69:04:11:24 10:00:00:60:69:04:11:23 21:00:00:e0:8b:04:70:3b 10:00:00:60:69:04:11:33 20:00:00:20:37:65:ce:55 20:00:00:20:37:65:ce:66 00:00:00:00:00:00:00:00 } 0 Done 1 Display the access list 2 Add member based on its Port/Node WWN 3 Delete member based on its Port/Node WWN select : (0..3) [1] 0 done ... Update the FLASH? (yes, y, no, n): [yes] y *Successfully saved the MS ACL to the flash. Deleting a member from the ACL 1. Connect to the switch and log in as admin. 2. Enter the msConfigure command. The command becomes interactive. 3. At the "select" prompt, enter 3 to delete a member based on its port/node WWN. 4. At the "Port/Node WWN" prompt, enter the WWN of the member to be deleted from the ACL. 5. At the "select" prompt, enter 1 to display the access list so you can verify that the WWN you entered was deleted from the ACL. 6. After verifying that the WWN was deleted correctly, enter 0 at the "select" prompt to end the session. 7. At the "Update the FLASH?" prompt, enter y. 8. Press Enter to update the nonvolatile memory and end the session. Example of deleting a member from the management server ACL. switch:admin> msconfigure 0 Done 1 Display the access list 2 Add member based on its Port/Node WWN 3 Delete member based on its Port/Node WWN select : (0..3) [1] 2 Port/Node WWN (in hex): [00:00:00:00:00:00:00:00] 10:00:00:00:c9:29:b3:84 *WWN is successfully added to the MS ACL. Fabric OS Administrator's Guide 55 53-1001336-01