HP StorageWorks 1606 Brocade Fabric OS Administrator's Guide v6.3.0 (53-100133 - Page 96

3 Management server database Displaying the management server ACL 1. Connect to the switch and log in using an account assigned to the admin role. 2. Enter the msConfigure command. The command becomes interactive. 3. At the "select" prompt, enter 1 to display the access list. A list of WWNs that have access to the management server is displayed. Example of an empty access list switch:admin> msconfigure 0 Done 1 Display the access list 2 Add member based on its Port/Node WWN 3 Delete member based on its Port/Node WWN select : (0..3) [1] 1 MS Access list is empty. 0 Done 1 Display the access list 2 Add member based on its Port/Node WWN 3 Delete member based on its Port/Node WWN select : (0..3) [1] 0 done ... Adding a member to the ACL 1. Connect to the switch and log in using an account assigned to the admin role. 2. Enter the msConfigure command. The command becomes interactive. 3. At the "select" prompt, enter 2 to add a member based on its port/node WWN. 4. At the "Port/Node WWN" prompt, enter the WWN of the host to be added to the ACL. 5. At the "select" prompt, enter 1 to display the access list so you can verify that the WWN you entered was added to the ACL. 6. After verifying that the WWN was added correctly, enter 0 at the prompt to end the session. 7. At the "Update the FLASH?" prompt, enter y. 8. Press Enter to update the nonvolatile memory and end the session. Example of adding a member to the management server's ACL switch:admin> msconfigure 0 Done 1 Display the access list 2 Add member based on its Port/Node WWN 3 Delete member based on its Port/Node WWN select : (0..3) [1] 2 Port/Node WWN (in hex): [00:00:00:00:00:00:00:00] 20:00:00:20:37:65:ce:aa *WWN is successfully added to the MS ACL. 0 Done 1 Display the access list 2 Add member based on its Port/Node WWN 3 Delete member based on its Port/Node WWN 54 Fabric OS Administrator's Guide 53-1001336-01