HP StorageWorks 2/16V HP StorageWorks Fabric OS V3.1.3A Release Notes (AA-RUQY - Page 23
might express this value in, units other than milliseconds.
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
CLI Command Updates and Changes The hop count includes all hops in the direct path from source to destination, and also all the hops in the reverse path, if reverse-path tracing is requested. The default value for the maximum hop count is 25. Basic statistics Basic statistics report variables that give an indication of ISL congestion along the path. They include the following: B/s Txcrdz Bytes per second. The length of time, in milliseconds, that the port has been prevented from transmitting frames due to lack of buffer-to-buffer credit. This is an indication of downstream congestion. Note that other commands-for example, portStatsShow-might express this value in units other than milliseconds. Extended statistics Extended statistics report variables of general interest. They include the following: F/s Words Frames Errors Frames per second. Total number of 4-byte Fibre Channel words. Total number of frames. Total number of errors that might cause a frame to be received incorrectly. This includes CRC errors, bad-EOF errors, frame-truncated errors, frame-too-short errors, and encoding errors inside a frame. Reverse path In general, the path from port A on switch X to port B on switch Y might be different from the path from port B to port A. The difference could be in the links traversed between the same sequence of switches, or the reverse path might even involve different switches. The trace reverse path option allows the user to determine both routing and statistics information for the reverse path, in addition to those for the direct path. Fabric OS 3.1.3a Release Notes 23