HP StorageWorks 2/16V HP StorageWorks Fabric OS V3.1.3A Release Notes (AA-RUQY - Page 50
DIAG-INTNIL, ASIC failed to get a CMI error interrupt. This usually indicates an ASIC failure.
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
New Diagnostic and System Error Messages Recommended Action Check for a faulty cable or deteriorated SFP. Replace the cable or SFP if necessary. If the problem persists: For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8, you must replace the entire switch. Severity Critical DIAG-INTNIL Message Critical DIAG-INTNIL, 1 Probable Cause ASIC failed to get a CMI error (interrupt). This usually indicates an ASIC failure. This message is generated by the cmitest command, if problems are found. Recommended Action For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8, you must replace the entire switch. Severity Critical 50 Fabric OS 3.1.3a Release Notes
New Diagnostic and System Error Messages
50
Fabric OS 3.1.3a Release Notes
Recommended Action
Check for a faulty cable or deteriorated SFP. Replace the cable or SFP if
necessary.
If the problem persists:
For the SAN Switch 2/16, replace the motherboard FRU.
For the SAN Switch 2/8, you must replace the entire switch.
Severity
Critical
Message
Critical DIAG-INTNIL, 1
Probable Cause
ASIC failed to get a CMI error (interrupt). This usually indicates an ASIC failure.
This message is generated by the
cmitest
command, if problems are found.
Recommended Action
For the SAN Switch 2/16, replace the motherboard FRU.
For the SAN Switch 2/8, you must replace the entire switch.
Severity
Critical
DIAG-INTNIL