HP StorageWorks 2/16V HP StorageWorks Fabric OS V3.1.3A Release Notes (AA-RUQY - Page 59
Diag-regerr, Diag-regerr_unrst
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
New Diagnostic and System Error Messages DIAG-REGERR Critical DIAG-REGERR, 1 Probable Cause Data read from an ASIC register or ASIC SRAM did not match data previously written into the same location. This usually indicates an ASIC failure. This message is generated by the portregtest or the sramretentiontest commands, if problems are found. Recommended Action For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8, you must replace the entire switch. Severity Critical DIAG-REGERR_UNRST Message Critical DIAG-REGERR_UNRST, 1 Probable Cause Port failed to unreset. This usually indicates an ASIC failure. This message is generated by the portregtest or the sramretentiontest commands, if problems are found. Recommended Action For the SAN Switch 2/16, replace the motherboard FRU. For the SAN Switch 2/8, you must replace the entire switch. Severity Critical Fabric OS 3.1.3a Release Notes 59