HP rp5400 User Guide - HP rp5400 Family of Servers - Page 149
Front Bezel Removal (Single Piece), HotPlug Disks A0, A1, and B0, B1.
View all HP rp5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
Removing and Replacing Components Individual Component Remove/Replace Instructions Front Bezel Removal (Single Piece) The rp54xx server front bezel is hinged on the left (facing the front of the server). The server does not have to be turned off to open or to completely remove the bezel. Opening the door provides access to the following components: • HotPlug Disks (A0, A1, and B0, B1). • Removable Media (CD-ROM drive, etc.). • HotSwap Chassis Fan cover. • HotSwap Chassis Fan 0. • HotSwap Power Supplies (up to three). To open the front bezel, grasp the right edge of the bezel and pull out. The bezel will swing away from the chassis. To remove the entire bezel, perform the following steps: 1. Open the front bezel and swing it to the left as far as possible. 2. Pry the hinge cover, located on the left side of the server, off the chassis. 3. While supporting the bezel, remove the screws that secure the bezel hinge to the left side of the server. 4. Grasp the left side of the bezel and pull it loose. The following graphic shows the front bezel. Chapter 7 135