HP rp5400 User Guide - HP rp5400 Family of Servers - Page 154
Core I/O Replacement, For revision B GSP only, remove
View all HP rp5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Removing and Replacing Components Individual Component Remove/Replace Instructions Core I/O Replacement rp54xx Core I/O functions are contained on the GSP and LAN/SCSI cards. Both cards are located on the PCI Backplane in the side service bay. The LAN/SCSI card is in I/O slot 1 and the GSP card is in slot 2. Before replacing either of the Core I/O cards, perform the following tasks: • Power down the server. • Detach all power cords from the server. NOTE For revision B GSP only, remove one of the MAC address labels and place on the rear of the server as shown in the following graphics. To replace a Core I/O card, perform the following steps: 140 Chapter 7
Chapter 7
Removing and Replacing Components
Individual Component Remove/Replace Instructions
140
Core I/O Replacement
rp54xx Core I/O functions are contained on the GSP and LAN/SCSI cards. Both cards are located on the PCI
Backplane in the side service bay. The LAN/SCSI card is in I/O slot 1 and the GSP card is in slot 2.
Before replacing either of the Core I/O cards, perform the following tasks:
•
Power down the server.
•
Detach all power cords from the server.
NOTE
For revision B GSP only, remove
one
of the MAC address labels and place on the rear of the
server as shown in the following graphics.
To replace a Core I/O card, perform the following steps: