HP rp5400 User Guide - HP rp5400 Family of Servers - Page 54
Step 5., Step 6., Step 7
View all HP rp5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Installing Additional Components Installing Graphics Step 5. Grasp the handle on the right rear panel and remove the panel from the side of the chassis. The 12 PCI slots, numbered 1-12 from bottom to top, will be in view. Step 6. Remove the PCI slot cover from the slot that will receive the PCI card. To remove the PCI slot cover, slide the PCI slot cover away from the server. Step 7. Center the graphics card within the space created by removing the PCI I/O slot cover. Slide the card toward the edge connectors. Ensure the edge connectors on the card are in alignment with the connectors of the slot. Apply pressure to the card until it snaps firmly in place. Repeat process for USB card. NOTE The graphics card must be installed in any Turbo slot while the USB will work in any slot. To reserve Turbo slots for high performance I/O cards, install the USB card in a non-Turbo slot 40 Chapter 3