HP rp5400 User Guide - HP rp5400 Family of Servers - Page 24
Install Deskside Server,
View all HP rp5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Server Unpacking and Installation Install Deskside Server Install Deskside Server The following section describes the installation of a server into a Deskside enclosure for installation in an office environment. WARNING The typical rp54xx system can weigh up to 68kg (150lbs). HP recommends using an approved lifting device. • Lift and move the server in accordance with all local safety regulations. • Do not attempt to lift the server by the plastic handles on the top and side covers. Failure to follow these precautions can cause injury to personnel or damage to equipment. Step 1. Unpack the server. Step 2. Unpack the deskside enclosure. Server Enclosure Outside Cover (Skin) Wheeled Enclosure Base NOTE Ensure that the positioning spring pins in the enclosure base align with the alignment holes in the bottom of the server. 10 Chapter 2