HP rp5400 User Guide - HP rp5400 Family of Servers - Page 25
Install Deskside Server
View all HP rp5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Server Unpacking and Installation Install Deskside Server Alignment Spring Pins Captive Fastener Step 3. Position the server on the wheeled enclosure base. Step 4. Tighten the two captive screws in the enclosure base to secure the server to the base. Step 5. Position the enclosure cover (outside skin) over the server and install and tighten the screws to secure it to the base. NOTE The perforations and the lip of the outside skin should be toward the rear of the server. WARNING Stacking rp54xx servers in deskside enclosures is not supported. Stacking rp54xx servers in deskside enclosures can damage equipment, may cause injury to personnel, and may void your warranty or service contract. Step 6. Install the Front Bezel. Step 7. Locate the two pull-tabs. One pull-tab is longer than the other. The shorter pull-tab is blank on both sides. The back of the shorter pull-tab provides a writable surface for Customer use. Chapter 2 11