HP rp5400 User Guide - HP rp5400 Family of Servers - Page 157
PCI Card Separator/Extractor Replacement, following tasks
View all HP rp5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Removing and Replacing Components Individual Component Remove/Replace Instructions PCI Card Separator/Extractor Replacement PCI card separator/extractors are located in the Side Service Bay on the PCI Backplane, between PCI cards. PCI card separator/extractors are plastic cards with two tab handles and two LEDs. To replace a PCI card separator/extractor, perform the following steps: 1. Insert the PCI card separator/extractor into the available slot and slide it into the PCI backplane connector. 2. Be sure the two hook tabs on the PCI card separator/extractor insert into the connector blocks on either side of the PCI backplane. Once you have completed replacement of the PCI card separator/extractor into the server, perform the following tasks: • Replace the PCI card, if necessary. • Power up the server. Chapter 7 143