HP rp5400 User Guide - HP rp5400 Family of Servers - Page 179
Memory DIMM Replacement, Replacing rp5400 and/or rp5450 Memory DIMMs, Replacing rp5470 Memory DIMMs
View all HP rp5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
Removing and Replacing Components Individual Component Remove/Replace Instructions Memory DIMM Replacement Memory DIMMs reside in slots located on the System Board (up to eight). They are loaded in DIMM pairs of equal size. Replacing rp5400 and/or rp5450 Memory DIMMs To replace a memory DIMM, perform the following steps: 1. Seat the memory DIMM into its socket. 2. Press the extractor levers on each end of the memory DIMM slot inward until the levers snap into place. The following graphics show a memory DIMM and a display of DIMM removal/replacement. Replacing rp5470 Memory DIMMs To replace an rp5470 memory DIMM, perform the following steps: 1. Seat the memory DIMM into its socket on the Memory Carrier. 2. Press the extractor levers on each end of the memory DIMM slot inward until the levers snap into place. 3. Attach the Memory Clip to the Memory Carrier with the DIMM slot markings on the top of the Memory Clip aligned with the DIMM slot markings on the Memory Carrier. Secure the Memory Clip using the captive screws. 4. Seat the Memory Carrier into the slot on the System Board. 5. Push down on the extractor levers and snap them into place. Chapter 7 165