HP rp5400 User Guide - HP rp5400 Family of Servers - Page 58
Installing Disk Drives
View all HP rp5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Installing Additional Components Installing Disk Drives Installing Disk Drives rp54xx servers support up to four optional internal hard drives. These drives must be installed in the following sequence: It is not necessary to shutdown the HP-UX operating system or power off the server to install a new disk. Follow this procedure to add internal hard disk drives to your rp54xx server. Step 1. If a front bezel is installed on the face of the server, open the right-hand panel to gain access to the disk slots. Step 2. Remove the disk drive slot cover. Step 3. Insert the new disk drive into the slot until the rear connectors snap into place in the card guide. As shown in the following graphic, the notches at the top of the disk drives must snap over the small brackets in the disk bay to ensure a firm connection. 44 Chapter 3