HP rp5400 User Guide - HP rp5400 Family of Servers - Page 181
Display Board Replacement, On/Off switch into their respective chassis openings.
View all HP rp5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
Removing and Replacing Components Individual Component Remove/Replace Instructions Display Board Replacement The Display Board contains the server's ON/OFF switch and five LEDs that indicate server status when power is applied. CAUTION The Display Board is not a HotSwap or HotPlug unit. Ensure that it is powered-down prior to removal. To replace the Display Board, perform the following tasks: 1. Reconnect the ribbon cable to the Display Board. 2. Carefully push the Display Board up through the top of the Chassis Fan cavity and insert the LEDs and On/Off switch into their respective chassis openings. 3. Replace three T-10 screws. The following graphic shows the Display Board location (item 1) (looking up from the bottom of the front of the server). 1 The next graphic shows the Display Board module. Chapter 7 167