HP rp5400 User Guide - HP rp5400 Family of Servers - Page 178
Memory DIMM Removal, Removing rp5400 Memory DIMMs
View all HP rp5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Removing and Replacing Components Individual Component Remove/Replace Instructions Memory DIMM Removal Memory DIMMs reside in slots (up to eight) located on the System Board. They are loaded in DIMM pairs of equal size. Removing rp5400 Memory DIMMs To remove an rp5400 memory DIMM, perform the following steps: 1. Press down on the extractor levers on each end of the selected memory DIMM to unseat the DIMM from its socket. 2. When the memory DIMM unseats from the socket, pull it up and away from the System Board. The following graphics show a memory DIMM, followed by a display of a DIMM being removed/replaced. Removing rp5470 Memory DIMMs To remove an rp5470 memory DIMM, perform the following steps: 1. Pull up on the extractor levers on each end of the Memory Carrier to unseat the Memory Carrier from its socket. 2. When the Memory Carrier unseats from the socket, pull it up and away from the System Board. 3. Loosen the captive screws that secure the DIMM Clip and remove DIMM Clip from the Memory Carrier. 4. Press down on the extractor levers on each end of the selected memory DIMM to unseat the DIMM from its socket. 5. When the memory DIMM unseats from the socket, pull it up and away from the Memory Carrier. 164 Chapter 7