Honeywell HRSD40F250 User Guide - Page 107
Freezing the Live Monitoring Image, Multi-View Displays
View all Honeywell HRSD40F250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Operation Figure 4-2 Mouse Menu 2. Select Display, then Camera, and then choose the camera from the list. Multi-View Displays Press QUAD/SEQUENCE on the front of the DVR to toggle between quad (2x2) display mode and sequence mode. Freezing the Live Monitoring Image Press in the Live Monitoring mode to freeze the current image until you press again. The screen displays when the DVR is in Freeze mode. Zooming in on the Live Monitoring Image Front panel or remote control Enlarge an area of the video by pressing , the Zoom button. Press . For a few seconds after pressing , a rectangle displays on the screen. A rectangle shows the area that will be enlarged.You can move the rectangle around using the arrow buttons. Pressing while in the Zoom mode enlarges the area in the rectangle. Exit the Zoom mode by pressing . While in the Zoom mode, the icon displays if Zoom is selected in the Display setup screen (OSD tab). Mouse 1. Right-click the mouse during live monitoring to open the mouse menu (see Figure 4-2). 2. Select Zoom from the menu. A rectangle appears over the live monitor image. 3. Move the zoomed area, as defined by the rectangle, by either: Document 800-03097 Rev C 107 03/09