Honeywell HRSD40F250 User Guide - Page 81
Configuring the Alarm-In Inputs, Configuring the Actions for each Alarm-In Input,
View all Honeywell HRSD40F250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Configuration Figure 3-49 Alarm-In Setup Screen Configuring the Alarm-In Inputs The alarm terminal strip on the back of the DVR has inputs associated with each alarm. You can set up each input on the Alarm-In screen. 1. Turn each input On or Off by highlighting the alarm number and pressing . 2. Give an input a title by highlighting the Title box and pressing keyboard appears so you can enter the title. . A virtual 3. Set each input as NO (normally open) or NC (normally closed) by highlighting the field under Type and pressing . 4. Save your Alarm-In changes by highlighting Save and pressing Cancel to exit the screen without saving the changes. . Select Configuring the Actions for each Alarm-In Input You can set the actions the DVR will take whenever it senses an input on one of its alarm input connectors. 1. Highlight the Actions tab, and the Alarm-In Actions setup screen appears. Document 800-03097 Rev C 81 03/09