Honeywell HRSD40F250 User Guide - Page 71

Configuration Adding or Editing an Alarm-Out Schedule Highlight the + and press to add a new Alarm-Out schedule. Note The higher the number in the No. column, the higher the priority. Highlight a field to edit it. Table 3-7 Setting Alarm-Out Schedules Field Day Range Mode Alarm-Out Function Allows you to select the days that the alarm schedule will be active. The choices are: Sun, Mon, Tue, Wed, Thu, Fri, Sat, M~F, Hol and All. Allows you to set the time that the alarm schedule will be active in 15-minute increments from 00:00 to 24:00. Allows you to set how the alarm reacts during the scheduled time. When set to On, the Alarm-Out is active during the scheduled time. When set to Event, the Alarm-Out is only active when there is an Event during the scheduled time. Allows you to select between Alarm Output and Beep (the internal buzzer). Allows you to delete an alarm output schedule. You will be asked to confirm whether or not you really wish to delete the schedule. Save your changes by highlighting Save and pressing screen without saving the changes. . Select Cancel to exit the Configuring the HSRD40 Displays The DVR can be set up to display Date, Time, Title, and Status on the monitor. You can select what icons appear. Each feature can be turned On or Off. You can also adjust the margins. Setting Up the OSD (On-Screen Display) Highlight Display in the Devices menu, and press on the main monitor. to set up the on-screen display Document 800-03097 Rev C 71 03/09