Honeywell HRSD40F250 User Guide - Page 83

Configuration Figure 3-51 Alarm-In Notify 5. Toggle the entire list On and Off by highlighting Notification and pressing . Toggle the individual items On and Off by highlighting that item and pressing . Highlight OK and press to accept your changes. Note For the Notify action, the notify item you select should be enabled in the Notification setup screen and the DVR should be registered in the RAS (Remote Administration System). 6. Highlight a field under the PTZ heading, and press . A list of PTZ presets appears. Select the preset position for each PTZ camera, which is where you want PTZ cameras to move to whenever the DVR detects an input on the associated alarm input. 7. Save your Alarm-In changes by highlighting Save and pressing Cancel to exit the screen without saving the changes. . Select Configuring for Motion Detection Your DVR has built-in video motion detection. For each camera, you can: • Turn motion detection On and Off • Set the sensitivity level from 1 (least sensitive) to 5 (most sensitive) • Select the image area to be monitored for motion detection Highlight Motion Detection in the Event menu and press setup screen appears. . The Motion Detection Document 800-03097 Rev C 83 03/09