Honeywell HRSD40F250 User Guide - Page 79
Setting the DVR for Pre-Event Recording, Cancel, Pre-Event, Dwell, Time & Event
View all Honeywell HRSD40F250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Configuration 9. Save your changes by highlighting Save and pressing the screen without saving the changes. . Select Cancel to exit Setting the DVR for Pre-Event Recording When the DVR is in the Event Record mode it is possible to have it record images before an event occurs. The Pre-Event setup screen allows you to define how to handle pre-event recording. Highlight Pre-Event in the Record menu and press appears. Figure 3-47 Pre-Event Setup Screen . The Pre-Event setup screen Turn individual cameras On or Off for pre-event recording by selecting the box next to the camera and pressing . Set the image speed from 0.10 to 30.00 ips (25.00 ips PAL) by selecting that field and pressing . Choose from 0.10 ips to 30.00 ips. Set the image quality by selecting that field and pressing High, Standard, and Low. . Choose from Very High, Set the amount of time to record prior to the event by adjusting the Dwell. Choose from 5 seconds to 30 minutes. The longer the dwell time, the fewer maximum ips can be set. Note When the DVR is in the Time or Time & Event mode, it ignores the pre-event settings and follows the time settings. Document 800-03097 Rev C 79 03/09