Honeywell HRSD40F250 User Guide - Page 34
Table 3-1, DVR Front Panel Controls, Control, Function, Camera Buttons, POWER LED, ALARM LED, HDD LED
View all Honeywell HRSD40F250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
HRSD40F DVR User Guide Note A separate ALARM button is not provided. Press any key on the front panel or remote control resets alarm output, including the internal buzzer, when the alarm is activated. However, when you are in the menu or PTZ mode, you have to exit the menu or PTZ mode first to reset alarm output. Note The sensor for the infrared remote control is to the left of the MENU button on the front of the VCR. Ensure that nothing blocks the sensor, or the remote control will not function properly. # Control Table 3-1 DVR Front Panel Controls Function 1 Camera Buttons (1 to 4) Press an individual camera button to display a selected camera full screen. Press the button again to change the display format to the quad (2x2) mode. Use the camera buttons to enter passwords (which contain only numbers). Use the camera buttons in the PTZ mode in the following ways: • Camera 1 zooms in • Camera 2 zooms out • Camera 3 controls near focus • Camera 4 controls far focus 2 POWER LED The POWER LED lights when the unit is On. 3 ALARM LED The ALARM LED lights when alarm output or internal buzzer is activated. 4 HDD LED The HDD LED lights when the DVR is recording. When the DVR is in the panic recording mode, the HDD LED flickers. 34