Honeywell HRSD40F250 User Guide - Page 91

Configuration Note For the Record action, the camera you select should be set to the Event or Time & Event recording mode in the Record Schedule setup screen. 3. Highlight a field under the Alarm-Out heading, and press . Select between Alarm Output and Beep (the internal buzzer) that you would like to activate and to sound whenever the DVR detects video loss on the selected camera. Note For the Alarm-Out action, the alarm output and beep you select should be set to the Event mode in the Alarm-Out setup screen (Schedule tab). 4. Highlight a field under the Notify heading, and press menu appears. . The Alarm-In Notify 5. Toggle the entire list On and Off by highlighting Notification and pressing . Toggle the individual items On and Off by highlighting that item and pressing . Highlight OK and press to accept your changes. Note For the Notify action, the notify item you select should be enabled in the Notification setup screen and the DVR should be registered in the RAS (Remote Administration System). 6. Highlight a field under the PTZ heading, and press . A list of PTZ presets appears. Select the preset position for each PTZ camera, where you want PTZ cameras to move to whenever the DVR detects video loss on the selected camera's input. 7. Save your Motion Detection changes by highlighting Save and pressing . Select Cancel to exit the screen without saving the changes. Configuring for Text Input The DVR can be set to react to text input from devices such as ATMs (Automated Teller Machines) and POS (Point of Sale; i.e., cash registers). You can configure the DVR for each text-in device. 1. Highlight Text-In in the Event menu and press appears. . The Text-In setup screen Document 800-03097 Rev C 91 03/09