Honeywell HRSD40F250 User Guide - Page 51
Adding Groups and Users, Adding a Group
View all Honeywell HRSD40F250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Configuration Table 3-4 Storage Screen Setup Fields Field Information Note When the storage condition is Bad, the Event Status Storage screen displays so you can check the storage condition for details. After the Bad message has appeared, replacing the hard disk drive is recommended, usually within 24 hours. Note Temperature and S.M.A.R.T. monitoring Information is available only for internal hard disk drives that support the S.M.A.R.T. monitoring program. Format... Not Formatted displays in the upper part of the Format... field if the hard disk drive has not been formatted. Highlight Format..., then click for recording. to format the storage device Adding Groups and Users Highlight User in the System menu and press Figure 3-16 User Setup Screen . The User setup screen appears. Select + and click to expand the user group. Select - and click to collapse the user group. The User setup screen displays the authorized groups and users. You can add and delete groups and users. When adding a group, you can assign authority levels to the group. Adding a Group 1. Select + Group, then press . The New Group window appears. Document 800-03097 Rev C 51 03/09